Godhand nipper for metal wires gh swn 125

Rubriek: Toys/Games - Modelbouwpakket

Prijs: 63.83 Nu voor: € 59.41

Rating: 0/5

☆

☆

☆

☆

☆

Verzending:
Op voorraad. Nu besteld, woensdag in huis

Godhand Metal Wire Line Nipper GH-SWN-125

In an industry first, GodHand presents this new nipper that can cut wires of thinner diameter at the tip, and thicker wires at the root! The cutting edge is different between its tip and root, to cut wires as finely as possible. Wires can be cut easily, without applying a lot of force to the nipper. Since the wire will be cut without being crushed, it can be inserted into holes drilled with the same diameter drill, and since it cuts flat, there will be less waste. Wires of a diameter from 2mm to 0.02mm can be easily and quickly cut for all your modeling needs! Each one is handmade to ensure quality.

This nipper can safely cut the following types and diameters of wire:

Brass wire: from 0.2mm (tip) to 2mm (root) Metal line: from 0.02mm to 0.042mm (tip) Copper wire: from 0.2mm (tip) to 2mm (root) Aluminum wire: from 0.2mm (tip) to 2mm (root Stainless steel wire (not baked): from 0.5mm or less (root) (Never cut stainless wire with the tip of the blade!)

Please do not use this nipper to cut hardened, high hardness type, stainless steel photo-etched parts, springs, piano wire, etc. If you use this instrument to only cut thick wires, it may not cut more fine-gauge wires.

Notes:

Do not cut anything other than the wires listed above For safely, please wear protective glasses Be sure no people or pets are around when using this item, as small pieces of cut wires may fly Do not touch the blade directly Do not apply much pressure to the blade; pay particular attention to the load on the tip. To prevent rust, wipe off dirt and fingerprints and apply oil to the shaft and the cutting edge. Store in a case out of the reach of children. If you touch the metal part with your finger, please wipe it clean and apply oil. Sebum can cause rust, so be sure to wipe it off with a clean cloth. Please be sure to maintain and lubricate this nipper regularly to ensure long life. Please cover the blades with a cap when not in use.

• 1 Bekijk alle specificaties

Godhand Nipper For Masking Tapes

Rating: 0 / 5
Prijs: 60.06 Nu voor: € 55.91

Nipper for masking tapes with width up to 12mm you can easily cut tapes presicely in a straight line and along the end of parts material carbon steelblade length 13mmprotection cap is included cutting capacity tapes with width less than 12mm including masking tapes guide tapes Op voorraad. Nu besteld, woensdag in huis .. MEER INFO

MR Hobby MR Nipper MT106 Single Edged Cutter Gereedschap

Rating: 0 / 5 | Prijs: € 63.99

Hobby kniptang mr hobby mr nipper mt106 single edged cutter Uiterlijk 2 december in huis .. MEER INFO

Godhand Kids Nipper EX

Rating: 0 / 5
Prijs: 43.6 Nu voor: € 40.58

Special single edged nipper safe and easy to use for children small but cuts very cleanly grips made shorter for kids round edges prevents children from getting injuredfrom touching the tip blades are super sharp and durablenot only for children but also for adult modelerswho has small hands Op voorraad. Nu besteld, woensdag in huis .. MEER INFO

Inclusief verf: Nee

Inclusief lijm: Nee

Merk: Godhand

EAN: 4562349879410

Kan zelfstandig met internet verbinden: Nee

App vereist voor volledige functionaliteit: Nee

Taal handleiding: Geen taal

Thema modelbouwpakket: Auto's

eWaste: Nee

EAN: 4562349879410

---