Uhu super glue control blister gel 3g
Uiterlijk 29 november in huis
PROPERTIES Extra strong Fast but temporarily adjustable Does not drip Ideal for porous materials and vertical surfaces Dishwasher proof and water resistant APPLICATION SUITABLE FOR:
Ideal for small-area bonds. Glues almost all solid and flexible materials like ceramics, leather, rubber, many plastics (such as rigid PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), and phenolic resins (Bakelite®)), porcelain, metal, wood, cork, felt, and cloth (check suitability first). Only partly suitable for glass (over a certain period of time the bond becomes brittle, causing it to weaken). Ideal for porous materials.
NOT SUITABLE FOR:Not suitable for PE, PP, silicone resins, PTFE, Styrofoam®, fabrics and leather clothing.
HANDLING BEFORE USE WORKING CONDITIONSDo not use at temperatures below +10 °C. The glue responds best to an air humidity level of 50-70 %.
SURFACE REQUIREMENTSSurfaces to be glued must be clean, dry, and free of dust and grease, and must fit exactly.
PRELIMINARY SURFACE TREATMENTAny dust, oil, grease, wax or separating agent should be thoroughly removed from the surfaces to be stuck together. The best way to achieve this is to rub the parts a number of times with appropriate solvents, such as acetone (if suitable for the material – check first!). For metals and metal alloys it is usually sufficient to roughen the surface using emery paper or by grinding or brushing.
DURING USE DIRECTIONS FOR USE1. To pierce the membrane, turn the cap clockwise firmly onto the tube. Tip: do not press the tube while piercing. 2. Unscrew the cap to reveal the applicator. Apply the adhesive directly from the tube, using the nozzle, as thinly as possible onto one side (too much glue slows down the curing process significantly). Press parts together immediately. After use, clean nozzle with a dry tissue and replace cap.
ADVICEWhen glueing at low humidity, curing time can be shortened by briefly breathing onto one of the parts to be assembled. The best glueing results are reached at room temperature.
POINTS OF ATTENTIONContains cyanoacrylate. Bonds skin and eyelids together in seconds. If product comes into contact with the eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, glue can be dissolved by soaking in warm soapy water. Then apply a skin cream. May cause respiratory irritation. Avoid breathing vapours. Keep out of the reach of children.
AFTER USE STAINS/RESIDUEWipe off excess glue immediately with a dry cloth. After curing, glue residue is very difficult to remove. Acetone will dissolve glue but very slowly (check suitability first).
STORAGE CONDITIONSStore in a dry, cool, frost-free place. Storage below +5 °C (in refrigerator) ensures maximum shelf life.
- 1 Bekijk alle specificaties
Prijs:
Prijs:
Merk: UHU
EAN: 4026700403602
Signaalwoord: Waarschuwing
Gevarenaanduiding (H-zinnen): Niet van toepassing
Voorzorgsaanduiding (P-zinnen): P102:Buiten het bereik van kinderen houden
Voorzorgsaanduiding (P-zinnen): P103:Alvorens te gebruiken, het etiket lezen
Voorzorgsaanduiding (P-zinnen): P202:Pas gebruiken nadat u alle veiligheidsvoorschriften gelezen en begrepen heeft
Aantal stuks in verpakking: 1 stuk(s)
Droogtijd: 1 seconde
Inhoud: 3 g
Type lijm: Secondelijm
Type lijm: Houtlijm
Type lijm: Montagelijm
Type lijm: Tegellijm
Type lijm: Universeellijm
Type lijm: Blokkenlijm
Type lijm: Daklijm
Type lijm: Vloerlijm
Type lijm: Contactlijm
Type lijm: Gipslijm
Type lijm: Glaslijm
Type lijm: Glasvezellijm
Type lijm: Pvc lijm
Uithardingsproces: Koud
Watervast: Nee
EAN: 4026700403602