Gezu impex verstelbare voetspindel 300x38mm stalen spindel met voetplaat thermisch verzinkt

Rubriek: Tools/Equipment - Hand - Steigeraccessoires

Prijs: € 21.47

Rating: 0/5

☆

☆

☆

☆

☆

Verzending:
Uiterlijk 29 november in huis

Tube Ø outside: 38 mmBase plate: 150 x 150 mmAccording to DIN 4425Capacity: 50 kNLock against unscrewing the nutHot Dip GalvanizedFor stability reasons the top 150 mm of base jack must not be used.Therefore is a lock against unscrewing the nut at this point
Our height-adjustable threaded foot plates are used to compensate for differences in height of the surface. Within the adjustment range, the scaffolding footplates allow for safe and horizontal positioning of scaffolds.The scaffolding feet have a diameter of 38 mm and are therefore suitable for all scaffolding with a tube diameter of 4.83 cm.Length is 300 mmThe base plate of the scaffolding spindle has a size of 150 x 150 mm and is quadruple punched. There is nothing in the way of anchoring the ground. Our spindles are made of galvanised steel and are manufactured according to DIN 4425.For stability reasons, the top 150 mm/200 mm of a scaffolding spindle must not be used. Therefore there is a lock against unscrewing the nut at this thread point.Technical data: length: 300 mm (working height - 150 mm), diameter: 38 mm, base plate: 150 x 150 mm, approximate: DIN 4425, material type: : galvanised steel.

• 1 Bekijk alle specificaties

Scaffolding Spindle 650x38 mm Galvanised

Rating: 0 / 5 | Prijs: € 24.11

Tube outside 38 mmbase plate 150 x 150 mmaccording to din 4425capacity 50 knlock against unscrewing the nutelectro zinc platedfor stability reasons the top 150 mm of base jack must not be used therefore is a lock against unscrewing the nut at this pointour height adjustable threaded foot plate Uiterlijk 29 november in huis .. MEER INFO

GeZu-Impex ® Verstelbare voetspindel 800x38 mm, Stalen spindel met voetplaat, thermisch verzinkt

Rating: 0 / 5 | Prijs: € 26.02

Tube outside 38 mmbase plate 150 x 150 mmaccording to din 4425capacity 50 knlock against unscrewing the nuthot dip galvanizedfor stability reasons the top 150 mm of base jack must not be used therefore is a lock against unscrewing the nut at this pointour height adjustable threaded foot plates Uiterlijk 29 november in huis .. MEER INFO