Right angle coupler 48x48 mm

Rubriek: Tools/Equipment - Hand - Steigeraccessoires

Prijs: € 15.03

Rating: 0/5

☆

☆

☆

☆

☆

Verzending:
Uiterlijk 2 december in huis

Suitable for scaffold tubes Ø 48,3 mmCorrugated typeWelded-on bolt M14 x 50 mmAccording to EN74Coupler: Galvanized steelCollar nut: AF 22, galvanized steelT-Bolt: Metric thread, galvanized steel
Right angled couplers / Clamps for scaffolding tubes 48x48 mm, EN 74B, EZPOur normal coupling connect two scaffolding pipes at 90° angle to each other. They are used as a rigid connection of scaffolding tubes, or in combination with our scaffolding anchors to attach the scaffolding to the wall.The hammer head screw is 82 mm long and the fret nut has a spanner width of 22. The material of the hammer head screw and fret nut is yellow galvanised steel.The scaffolding clamps have a diameter of 48 mm and are therefore suitable for all scaffolding with a tube diameter of 4.83 cm. Our rigid coupling is made of galvanised steel and in ribbed design.Technical data: diameter: 48/48 mm, spanner width: SW 22, material type: Electro Zinc Plated All couplings are produced in accordance with EN 74 and are equipped with the corresponding test mark

• 1 Bekijk alle specificaties